Note: Shrinkage test: cylinder pressure on one side is 80Mpa, body diameter is 30mm, weight is 20g.
1.93% alumina ceramic powder (DC-R93, DC-D93)
This product has special material selection, advanced formula, low temperature, low shrinkage rate, less porosity, high sintering density,
conducive to metallization and other characteristics, ceramic performance is better than 95% ceramics
2.Low temperature 99% alumina ceramic powder (DC-D99)
Using ultrafine powder as raw material, scientifically prepared, can directly spray granulation, porcelain forming temperature is low (1630°
CX2.5h); Small shrinkage (16 +0.5), good tolerance control; High sintering density (3.9g /cm3- 3.92g/cm3), good ceramic properties.
3 . Low temperature 99% alumina ceramic powder for Hot Die Casting (DC-R99)
α-ai2o3 powder with high conversion rate is selected, and the gradation is reasonable. It can be directly used for hot die casting with wax, and
the porcelain temperature is 1650°C. Stable shrinkage, high sintering density (>3.85g/cm3), can be sintered with 95% common alumina porcelain in
the same furnace.